The rock layers are alternating sandstone and mudstone layers that stand out as distinct lines.
As the sediment laden water surged across the
sea floor it laid down a deposit of sand and mud with several distinct layers.
The base layer typically has very flat laminations, followed by a more
convoluted and rippled layer above it. Above that the particles get finer as
the remaining cloud of mud slowly settled on top of the coarser sandy layers
below.
It is interesting to look at the different structures
and imagine how they formed in the dark depths of the sea so long ago. Here I am pointing at some climbing ripples in the upper sandstone layer, above a more regularly laminated base layer of the flow. They show that the current was moving from the left (south).
Exploring the area shows up many interesting
geological features.
Here you can see that the beds are not only tilted
up, but they have been dislocated by faults.
In this image you can see joints cutting across the
beds at a right angle. They develop as the pressure on the sequence decreases due to
erosion of overlying material. You can see how the spacing between the
joints is wider for the thicker beds, and closer together on the thinner ones.
During our visit, Garth Archibald was making a laser scan of the surface of the shore platform. This will be translated into a 3 dimensional computer image of the platform which can then be used for detailed analysis of the different layers in the sequence.
Garth has used his laser scanner in a wide variety of settings, including a number of Christchurch cliffs that were seriously shattered by recent earthquakes, as you can see in this video.
Nice work, awesomely cool.
ReplyDeletethx
ReplyDeleteso good
ReplyDeletethanks